Product ID:S/G LATEX WHITE & PASTEL, PRODUCT ID:88-6
MSDS Date:01/26/1990
FSC:8010
NIIN:00F018029
MSDS Number: BTJDB

PPG INDUSTRIES INC

1 PPG PL
PITTSBURGH, PA 15272
US

Emergency Phone: 304-843-1300

Info Phone: 304-834-1300/412-963-5822

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 2-5%

ACGIH TLV: C 50 PPM,VAPOR; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 40-45%

FILM FORMERS, RESINS (ROSIN), & ADDITIVES

Fraction By Weight: 20-25%

2,2,4-TRIMETYL-1,3-PENTANEDIOL ISOBUTYRATE

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%

LD50 LC50 Mixture:NOT KNOWN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL. EYE:IRRIT.
SKIN:SLIGHT IRRIT.INHAL:HARMFUL.VAPOR GENERATED @ ELEVATED TEMP
EYE/NOSE/THROAT IRRIT. CHRONIC:AVOID LONG ERM AND REPEATED CONTACT.
Explanation of Carcinogenicity:PER MSDS:TI02 LUNG TUMORS IN
ANIMALS;ETHYLENE GLYCOL BIRTH DEFECTS IN LAB ANIMALS.
Effects of Overexposure:REDNESS, ITCHING, BURNING SENSATION AND VISUAL
DISTURBANCES MAY INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING,
CRACKING, BURNING, REDNESS, AND SWELLING ARE CONDITIONS ASSOCIATED
WITH EXCESSIVE SKIN CONTACT.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR @ LEAST 15MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY
WSHNG W/SOAP & WATER. CONTACT POISON CTRL CTR/EMERG/RM/DOCTOR &
HAVE MS DS IF INGESTION, EXCESSIVE EXPOSURE TO A CORROSIVE
MATERIAL. PERSISTENT SKIN/EYE IRRIT OR BREATHING DIFFICULIES.

Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLS B EXTINGUISHER(CO2/DRY CHEM/UNIVERSAL
AQUEOUS FILM FORMING FOAM)DESIGNATED TO EXTINGUISH NFPA CLS IIIB
FIRE
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE;USE TO COOL
CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP & POSS
AUTOIGNITION/EXPLOSION WHEN EXPOSED TO HI HEAT.USE FOG NOZZLE.
Unusual Fire/Explosion Hazard:FIREFIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS.CLOSED CONTAINERS MAY EXPLODE/BUST(DUE TO
BUILDUP OF STEAM PRESSURE)WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION.ONLY PERSONNEL
EQUIPPED W/PROPER RESP,SKIN,EYE PROTECTION SHOULD BE PERMITTED IN
AREA.REMOVE ALL SOURCES OF IGNITION.TAKE UP SPILLED MATL
W/SAWDUST,VERMICULITE, OR OTHER AB SORBENT MATL & PLACE INTO
CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NOT GIVEN.

Handling and Storage Precautions:DON'T STORE >120F. STORE LG QUANT IN
BUILDING DESIGNED & PROTECTED FOR STORATE OF NFPA CLS 111B LIQUID.
PROTECT FROM FREEZING.
Other Precautions:IF THIS MATL IS PAAAAAT OF A MULIPLE COMPONENT
COATING SYS READ THE MATERIAL MSDS FOR OTHER COMPONENT OR
COMPONENTS BEFORE BLENDING AS THE RESULTING MIXTURE MAY HAVE THE
HAZARD OF ALL OF ITS PARTS.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE USE A SUITABLE
RESPIRATOR.
Ventilation:GEN DILUTION /LOCAL EXHAUST VENTILATION IN VOL & PATTERN TO
KEEP CONCEN OF INGREDIENTS BELOW LOWEST LEL & REMOVE DECOMP
Protective Gloves:NITRILE, NEOPRENE, LATEX
Eye Protection:CHEMICAL-TYPE SPLASH GOGGLES.
Other Protective Equipment:PROTECTIVE CLOHTING INCLUDING IMPERMEABLE
APRON CONSTRUCTED OF NITRILE, NEOPRENE, OR LATEX.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:180F,82C
Vapor Pres:17.0
Vapor Density:>AIR
Spec Gravity:1.28
Evaporation Rate & Reference:31, (BUOAC=100)
Solubility in Water:48.4%, APPRECIABLE
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
CHEICAL FAMILY & SOLVENTS LIS
Percent Volatiles by Volume:64.60

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:SEE MATL TO AVOID.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODUCTS WHEN
HEATED.WELD/BRAZE/FLAMECUTT ON SURFACES COATED W/MATL MAY PRODUCE
FUMES INCLUDE CO.

Waste Disposal Methods:DISPOSE IAW FED/STATE/PROVINCIAL/LOCAL
ENVIRONMENTAL CONTROL REGULATIONS. EMPTY CONTAINERS SHOULD BE
RECYCLED OR DISPOSED OF THRU AN APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.